PSX Penetrating X-treme Premium Seal™ is an invisible/natural-look penetrating sealer. It is used to protect and seal any commercial or high-traffic area and can be applied in both vertical or horizontal applications. It protects surfaces against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt and smog. It is easy to apply and retains the original appearance of the surface.
BENEFITS
Invisible/natural-look finish
Restores & protects
Water-based
Minimizes salt and freeze/thaw damage
Provides UV protection
Ideal for high-traffic areas
Breathable
APPLICATIONS
Concrete Pavers
Permeable Pavers
Clay/Brick Pavers
Wetcast
Retaining Walls
*This product is sold by the carton (four - 1 gallon bottles per carton) OR 5 gallon bucket*
INSTRUCTIONS
CLEAN
Wait 28 days after installing polymeric sand before sealing.
Thoroughly sweep surface of joint sand or loose material.
Spot clean if needed with one of the SRW Specialty Clean™ products. Then, prepare the surface with an SRW Products General Purpose Cleaner.
CLIMATE
After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
Recommended application temperatures are 50°F - 80°F (10°C - 27°C) from installation through the cure process.
Do not apply if inclement weather is forecasted within 24 hours.
APPLY
STIR THOROUGHLY
Apply with an SRW Products approved Slit Foam Roller and sprayer.
For best results, spray then back roll. This prevents an uneven finish. A 2-person application is recommended.
Start at the highest project elevation. Do not allow sealer to pool on surface or in joints.
Repeat if desired.
CURE
Allow sealed area to dry and cure 24 hours.
Protect area from water and rain until dry.
Dry-tack free: 25 minutes
Foot traffic: 24 hours
Vehicle traffic: 72 hours
Note all calculations based on 68°F-77°F (20°C-25°C)
