Hardscape professionals deserve products that are reliable and can save them time. Get both with the best polymeric sand on the market.
SRW is committed to getting better all the time. They are certain Pavermate Z3™ will provide faster, stronger, and longer-lasting results. SRW's new era polymeric sand can be used for a wide variety of applications and is packaged for safe and secure storage. It’s a one-sand solution for paver joints. Zero Haze, Zero Dust, and Zero Problems! Best of all, it's RAIN SAFE in just 10 MINUTES!
BENEFITS
Zero Haze:Portland-free formula cleanly sweeps to reduce any material left on the paver surface
Zero Dust:Polymers bind to each other and the sand particles creating anti-dusting results
Zero Problems:Provides protection against unexpected rain events - rain safe in 10 minutes.
APPLICATIONS
Paver Joints up to 2˝
Concrete Paver Joints
Driveways
Walkways
Patios
False Joints
Concrete Overlays
COLORS
Tan
Granite
Ivory
Black
*THIS PRODUCT IS SOLD BY THE PALLET. 49 BAGS PER PALLET. EACH BAG WEIGHS 50LBS*
INSTRUCTIONS
PREPARATION A. Install pavers using manufacturer’s guidelines for bedding, leveling and installation. Fully clean off debris from the project area.
Installations should have a proper drainage layer of sand with a depth of 1" (2.54 cm). In addition, weep holes need to be added to concrete overlays.
If existing project, properly clean out joints before applying polymeric sand and skip to step C.
B. Compact pavers thoroughly using a rubber-plated compactor.
If compactor is not rubber-plated, cover pavers with a woven fabric while compacting to help protect paver surface from damage.
Pavers must be completely dry before installing polymeric sand. Wait 24 hours after rain.
APPLICATION C. Gently tumble bag, then cut the bottom and apply Pavermate Z3™ evenly over the surface.
D. Spread sand into joints, completely filling to the full depth of the pavers.
Avoid pushing sand over long distances.
Remove excess sand from surface of pavers before compacting.
E. Compact filled joints using a rubber-plated compactor.
Repeat compacting and filling (steps C - E) if necessary.
F. Remove excess sand from paver surface using a soft bristle broom and set the joint height with a leaf blower on idle.
Once complete, joint height should be filled to 1/8" (.32 cm) below the top of the paver.
ACTIVATION G. Working in sections up to 200 sq. ft. (18.58 sq. m.), water the section for a total of 2 minutes.
Do not allow the section to dry during the 2 minute watering:
MIST: Use hose with a sprayer attachment set to “mist” or similar light setting. Mist area until the surface is wet.
SHOWER: Next, set hose to “light shower” to allow more water over the area. Repeat shower two times over the section.
H. Use a screwdriver to test for proper moisture depth of at least 1" (2.54 cm). If depth is not achieved, immediately wet the area with a shower setting.
I. Once moisture depth is achieved, blow off excess water using a leaf blower.
CURING J. Rain safe 10 minutes after joint activation.
A flexible joint is a sign that reaction has occurred but is not completely cured.
A dry environment is important to allow joints to fully cure. For best performance, install when no rain is forecasted for 24 hours.
Wait 28 days prior to cleaning or sealing.
USER-TIPS
JOINT SIZE/TYPE • Joint Width: Recommended for joints between 1/16" to 2" (.16 cm to 5.08 cm) at intersecting points. For concrete overlays, a maximum of 1" (2.54 cm) wide joints at intersecting points is recommended.
• Joint Depth: Minimum depth of 1 ½" (3.81 cm).
COVERAGE •Narrow Joints: Typical coverage is 55 - 75 sq. ft. (5.11 - 6.97 sq. m.) per bag.
• Wide Joints: Typical coverage is 20 - 30 sq. ft. (1.86 - 2.79 sq. m.) per bag.
INSTALLATION • Test in a small discrete area.
• Temperatures must remain above 32°F (0°C) throughout installation and curing.
• Not recommended for flagstone patios or wet/heavily shaded areas. Do not use on pool copings.
• Not for use on porcelain tile or natural stone.
• Clay pavers must be completely dry prior to sand install. Moisture in the clay pavers can activate the sand on the surface and leave a residue.
• Proper compaction is very important for obtaining optimal joint strength.
• Continuous dampness can prevent polymeric sand from curing properly. Irrigation systems should be turned off until polymeric sand has fully cured.
• For best results, wait 28 days after installation before cleaning and sealing.
